|
insulation, cold insulation, thermal insulation, rigid foam, pu foam, pur foam, pir foam,
???????????, ???????????????, ???????, ???? ???, ?????? ???, ?????? ??? |
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
| |
PIR Low leachable chloride |
|
|
| |
CKT PU is produced with chemicals from reliable sources, guaranteeing a constant product quality. This rigid polyurethane thermal insulation product is CFC free and fully recyclable. CKT PU has minimum impact on the environment. |
|
CKT PU Industrial Insulation products range from 34 to 60 kg/m3 density. Converted to sizes and shapes to the specifications,it is generally used by most Industries and many other environments where reliable, durable insulation with excellent thermal performance is required. |
|
CKT PU Industrial Insulation products are converted to shape in accordance with customer’s requirements and are only limited by the maximum block dimensions of 3,000mm x 1,220mm x 900mm thick. For large diameter sections the radius will be divided into as few segments as possible or to the stipulations in the specifications. Sections and board material can be shaped, upon request, with longitudinal and circumferential ship lap joints. |
|
CKT PU doesn’t require special conditions for storage. The block foam can be stored in the open air. Converted products should be stored weather-protected, free from the floor e.g. on flat beds, especially for thin board material. The converted product should be covered from daylight to avoid discoloration. Discoloration in no way affects the performance of this insulation material. Care should be taken that the products retain their original shape and some protection against impact damage should be provided. |
| |
|
|
SPECIFICATIONS |
Description |
Test Norm |
Unit |
Typical Value |
| |
MECHANICAL |
| |
Overall density |
| |
Compressive strength @ 23 degr.C |
| |
parallel |
| |
perpendicular |
| |
|
| |
Dimensional stability |
| |
+ 15 degr.C for 48 hrs |
| |
+ 100 degr. C for 48 hrs |
| |
|
| |
Water absorption |
|
| |
EN ISO 845 / ASTM 1622 |
EN 826 / ASTM D 1621 |
|
|
| |
EN 1604 / ASTM 2126 |
|
|
|
DIN 53433 |
|
| |
kg/m3 |
kg/m3 |
| |
kPa |
kPa |
| |
% |
% |
| |
Vol % |
|
| |
|
|
|
|
40 - 70
|
34 - 60 |
| |
130 |
110 |
| |
<0.5 |
<1.8 |
| |
3 - 5 |
|
| |
CHEMICAL |
| |
Closed cell content |
| |
|
| |
Operating temperature |
| |
Upper limit |
| |
Lower limit |
| |
|
| |
Fire Behavior |
| |
Color |
|
| |
EN ISO 4590 Method 1 / |
ASTM D 2856 Method B |
|
|
|
|
DIN 4102-1: 1998 |
|
|
|
| |
|
|
|
|
| |
90 - 99 |
| |
120 |
-100 |
| |
B2 |
cream |
|
| |
THERMAL |
| |
Themal Conductivity |
|
|
|
|
|
|
|
| |
|
|
|
|
passed |
available upon request
|
|
|
|
This leaflet is composed with the utmost care. All information in this document is true to our best knowledge at the date of issue.
Nevertheless we do not take any responsibility for any mistakes and inaccuracies inthe information contained herein.
Any liability for damages that may be caused, directly or indirectly, by using this information is excluded.
Information is subject to change without prior notice. |
|
|
|
|
|
|
|
|
|
| |
27/20 Soi Maptaphut 14 Watmaptaphut Rd. Muang Rayong Thailand.
Tel : 038 029 799 Fax : 038 029 799
Email : info@ckt-globalfoam.com |
|
 |
|
